HOME > Level switch > Vibration type level switch SHT series

Vibration type level switches

SHT series
SHT series
A level switch for high temperature that has attained the best heavy load performance and high sensitivity in its class

Ideal for detecting levels of powder and granulated materials at high temperatures. Can detect almost all powders, granules, and lumps.

  • For powder
  • For lumps

Attained the best high sensitivity (nominal specific gravity of 0.02) an best end load (1 kN) in its class, and can be used in harsh environments.

 

Features, keys

  1. Best high sensitivity level (detection is possible at a nominal specific gravity of 0.02) in the class
    It can detect various powders, incinerated ash, and fine powders.
  2. Can operate in harsh environments
    Can withstand 250 degrees and an end load (1kN).
  3. Various functions are provided
    Free-range power supply (20 to 250VAC/DC), fail-safe function, and CE marking.
  4. Easy to handle
    No need for sensitivity adjustments and maintenance.
 

Line-up

Model name SHT-120 SHT-130
Type Standard type that withstands 250 degrees Extension probe type that withstands 250 degrees
Features
High sensitivity and solid design, the best standard model in this series.
Dimensions can be adjusted to match the specific conditions
Major applications
Various powders, pellets, and chips, incinerator ash, resins, clinkers (raw material for cement), resins, etc
Incinerator ash, resins, clinker (raw material for cement)
Mainly used for angled and vertical installations in upper positions
Photograph SHT

 

Usages, use examples

Detects various powders, pellets, and chips, incinerator ash, resins, clinkers (raw material for cement), resins, etc.

Standard specifications

Model name SHT-120 SHT-130
Amplifier Maximum detection sensitivity
(Nominal specific gravity of material to be measured)
0.02
Input power source 20 to 250 VAC/DC
Configuration of output contact points 1C
Setting the output capacity AC1250VA DC80W
Maximum open/close voltage 250V AC
Maximum open/close current 5A
Power consumption 3VA
Allowable amplifier temperature -20 to +70 degrees
Case Protection class IP67
Materials Die-cast aluminum
Wiring hole M20×1.5
Detection
probe
Connection R1 1/2
(Many optional flanges are available *1)
R1 1/2
(Many optional flanges are available)
Materials SUS304
Allowable temperature -20 to +250 degrees
Allowable pressure *2 1.0MPa
Allowable load 1KN (offset load) -

*1: The flange for the SHT-120 screw in to the main housing.
*2: If the withstand pressure of the liquid contact areas is lower than this load value, the withstand pressure of the liquid contact area shall be applied.

  Please feel free to inquire us

  • Inquiries
Page Top