This page introduces our conductivity meters that measure the amount of moisture contained in detergent or oil and the conductivity meters to measure conductivity. It also introduces our flow meters, thermometers, and fine-differential pressure meters.
Other sensing equipment
Moisture meters
The moisture meter measures the moisture level in cleaning detergents by measuring the change in capacitance.
GM-113N/115 series
 |
Measures the water content in detergent. It is designed to provide great durability in harsh temperatures and noisy environments, and allows stable measurement |
|---|---|
 |
OM-11 series
 |
This series measures the water content in oil. Can measure the water content in various oils. Its simple design does not cause significant pressure loss, making for a long service life. |
|---|---|
|
WGL series
 |
[Ultra-compact type] This series measures the water content in oil with a high-sensitivity amplifier. The amplifier section is also "business card size" and is ideal for mounting small devices. The sensor electrodes can also be customized freely. |
|---|---|
|
WGL-W series
 |
[Temperature correction type] This series measures the water content in oil with a high-sensitivity amplifier. Ideal for mounting small devices. Can be temperature correction and 4-contact output. |
|---|---|
|
Conductivity meters
This meter measures the conductivity of materials such as liquids, and outputs the measured result as a continuous value.
MRL series
 |
Conductivity meter with multiple functions. Can measure a wide range of materials. Can be used in harsh conditions with special specifications, at high and low temperatures and high pressure. |
|---|---|
|
MRL-C series
|
Conductivity meter with temperature compensation. Can measure a wide range of materials.
|
|---|---|
|
Flow meter for liquids
Detect and measure liquid flow rate using a simple mechanism. Compact and lightweight, can be installed any location.
YJ series
 |
Compact flow rate switch using magnetism. Does not cause significant pressure loss and offers high reliability |
|---|---|
|
Flow meter for powders
Flow meter for powder that measure flow rate of falling powders and granulated materials.
YMF series
 |
[Flow switch for powder]A flow sensor which detects the flow or clogging of powder and granulated material in pipes and silos. |
|---|---|
|
MMF series
|
[Flow meter for powder]A flow sensor which detects the flow or clogging of powder and granulated material in pipes and silos. |
|---|---|
|
FM-701 series
 |
[Powder flow meter]Measures flow rate by passing (falling) a powder or granulated materials between the two electrodes. It has no mechanically moving part so it provides a long life. |
|---|---|
|
Meters for supervising changes in substance characteristics
Metering equipment to monitor change of substances using dielectric coefficients of these substances. We design individual system to match each customer's specifications.
YOL series
 |
[Liquid type discrimination sensor]This sensor detects the interruption of the liquid flowing in the pipe and the mixing of another liquid. Can be distinguish between oil and water flowing in the piping. |
|---|---|
|
MDL series
 |
[Meters for supervising changes in substance characteristics]Measures changes in the physical properties of liquids in-line. Equipped with an OLED display. Can measure the mixing ratio of two liquids and distinguish the liquid types of multiple liquids. |
|---|---|
|
CM series
 |
Measuring equipment to measure capacitance of substances. Measures and displays both capacitance and conductance, independently. |
|---|---|
|
CPS-24 series
 |
[Leakage sensor]This sensor detects leaks from the floor or distilled water reservoir. Can be detected the liquid in the gauge tube without contact. In combination with a barrier, it also supports intrinsically safe explosion-proof. |
|---|---|
|
Thermometers
Thermometer to be used in harsh environments in a plant. Can be used in mixers and hot chutes.
SL/WL/5DL series
 |
Can be used in every location throughout a plant. Provides high sensitivity and a long service life. It can be used in a harsh environment. |
|---|---|
|
5D series
 |
Can be used for mixers and hot chutes. Provides high sensitivity and a long service life. It can be used in a harsh environment. |
|---|---|
 |
Micro differential pressure meters
Used to control room air, control room pressure in a clean room, and assessing the clogging of filters.
WO81/WO71/FR51A series
 |
After thorough improvement on bundling mechanism and differential pulley system, the manostar gauge offers high precision and durability. |
|---|---|
|
MS99/MS99S series
 |
The pressure setting can be adjusted easily using a knob with a scale. It can be used in various ways, including in vehicles where there is vibration, and for detecting air pressure through a filter clogged with powder and dust. |
|---|---|
|
EMT series
 |
The Manosys makes automatic measurements and controlling fine pressure differences after converting pressure changes into electric signals. |
|---|---|
|
EMD7/EMD8A/QDP33 series
 |
The high-performance digital micro differential pressure gauge. The varuety of function, moving average filter, display of max. and min. value, delay timer, and so on. |
|---|---|
|
Please feel free to inquire us
