HOME > Level switch > Strong electric conductive level switch YCL

Strong electric conductive level switch

YCL type
YCL type
Ideal for a conductive liquid and power
Also match to many adherent of material to be measured

It measure the change of resistance between the detecting electrode and ground electrode. Ideal for a strong adhesion and conductivity at the material to be measured (miso or shampoo etc.).

  • For liquid

In high durability without flexible retion to the sensor, has excellent cleaning.


Features, keys

  1. Ideal for a conductive material to be measured
    Ideal for strong conductive at the material to be measured, miso, shampoo, such as carbon. It also ideal for the adhesion of strong conductive material.
  2. Provides stable detection even in harsh environments
    Can be used in harsh conditions such as high and low temperatures and high pressures, vacuum, vibration, and static electricity.
  3. High durability and cleanability
    In high durability without flexible retion to the sensor, has excellent cleaning.
  4. lower power consumption eco-design
    The power needed to drive the sensor has been decreased and it contributes to decreased costs and an improved ecology. This ecology design reduces costs 50% when compared with conventional models.
  5. Various functions and free-range power supply are provided
    Equipped with various functions including free-range power supply (20 to 250VAC/DC), a delay function, and a fail-safe function.

Usages, use examples

  • Detects the conductive materials. (material, food, pharmaceuticals, cosmetics, and toiletries etc.
  • Detects the liquid interface of strong conductive liquid and non-conductive liquid.
  • Decide the strong conductive liquid or non-conductive liquid in the CIP process of food processing.
  • The material to be measured with a strong adherent conductive in each process.

Standard specifications


Input power source 20 to 250 V AC/DC
Protection level IP68
Allowable amplifier temperature -10 to +60 degrees
Contact point output Relay contact point: 250V AC, 30V DC, 3A


Connection R3/4 and various flanges
(can be altered on request)
Material of the grounding and detecting electrodes SCS13
Material of the insulating parts Polyacetal, PTFE
Allowable detector temperature -10 to 80 degrees
(*There is a high temperature type )
Allowable detector pressure 2.0MPa

  Please feel free to inquire us

  • Inquiries
Page Top