Various amplifiers and electrodes

Our sensors are available in a variety of configurations to meet different applications and conditions. Select the sensor that best matches your needs using the selection boxes below.

Product design

You can choose the following items to meet your conditions.
• Amplifier characteristic ・(Select according to characteristics of material to measure)
• Unit configuration ・(Select according to installation position)
• Electrode type ・(Select according to usage)

 

Amplifier characteristic

Select an amplifier according to the characteristics of the material to be measured.

● MXL series
■ Liquids with a total capacitance of 4500pF or less (no adhering)
■ Liquids with high conductivity, semi-conductive, or high dielectric constant, non adhering (tap water, pure water, alcohol, etc.)

● MHL series

Model name	N	H	W	G
Type	Standard type	High sensitivity type	Wide range type	Adhesion correction type
Major applications	■ Liquids and powder with a total capacitance of 1,000pF or less (liquid chemicals, drain water, cement, calcium phosphate, wheat flour, etc.)	■ Short measuring distance ■ Insulating substance (adhesive agents, edible oil, etc) ■ A total capacitance of 100pF or less	■ Long measuring distance (wire electrode, etc.) ■ Semi-conductive substances (alcohol, etc.) ■ A total capacitance of 5000pF or less	■ Substances with high adhesiveness (adhesion correction of conductivity) (salt water, caustic soda, etc.) ■ A total capacitance of 2000pF or less

 

Unit configuration

Both integral and separate amplifier types are available.

Amplifier integral type	Amplifier separate type
The amplifier has been placed in the sensor head to make the shape simple and provide a low price • Water-proof (IP68) • Solid casing • Simple wiring • Wire saving • High reliability in any field.	Amplifier separate type makes it ideal for small tanks • When installation space is limited • The tank is subject to strong vibration • Very small tank for space saving

 

Electrode type

Select the best matched electrode from our line up.

1. Various liquids

Applications	• Liquid chemicals (acid, alkali) • Oil • Cleaning solution • Tap water • Pure water • Distilled water • Alcohol, etc.
Electrode	■ For small and medium size tanks (rod electrode) • H1 (removability coated tube) • H2 (caoted tube and non-caoted tube) ■ When the L dimension is long (wire electrode), the following types are available: • C1(flange, plumb bob) • C3 (flange, anchor) * Amplifier integral/separate Coated/bare electrodes

2. Various powders

Applications	• Resin pellets • Cement • Wheat flours • Bentonite • Calcium phosphate • Toner, etc.
Electrode	■ When the L dimension is long (wire electrode), the following types are available: • C1 (flange, plumb bob) • C3 (flange, anchor) ■ For small and medium size tanks (rod electrode) • H1 (removability coated tube) • H2 (caoted tube and non-caoted tube) * Amplifier integral/separate Coated/bared electrodes

3. Interface measurement

Applications	• Interface between water and oil • Measure the interface between two different liquids • Measure foam and liquid level
Electrode	The following electrodes are available: ■ For small and medium size tanks (rod electrode) • H1 (removability coated tube) • H2 (caoted tube and non-caoted tube) * Amplifier integral/separate Coated/bare electrodes ■ When the L dimension is long (wire electrode) • C1 (flange, plumb bob) • C3 (flange, anchor) * Amplifier integral/separate

4. Small tank

Applications	• For small units • For small tanks • Various liquids • Various liquids chemicals • Various powders and granulated materials
Electrode	The following electrodes are available: ■ Very small tank with normal pressure • G1(compact pencil type) ■ Small tank with high temperature and pressure • H2 (caoted tube and non-caoted tube) • Coated/bare electrode (G1 separate type only)