HOME > Select a model > Special applications (slurry, corrosive liquids, interfaces, sediments, bubbles)

Special applications (slurry, corrosive liquids, interfaces, sediments, bubbles)

This page introduces our level switches and continuous level meters to detect and measure viscous liquids (slurry), corrosive liquids, interfaces, sediment, and bubbles.

 

Viscous liquids (slurry, sludge)

We propose the optimal model for detecting and measuring viscous liquids, to suit the liquid type and various other conditions.

Viscous liquids (slurry, sludge) Figure

*This video introduces adhesion.
YAL

  1. Capacitance type level switch YAL/YAE
    • Compatible with a wide range of power specifications and provides high immunity to noise.
    • Using the adhesion-canceling function, the switch can measure viscous liquid
  2. Capacitance type level meter MXL/MHL
    Capacitance type level meter MAE
    • Can measure a wide temperature range, from very low to very high
    • Compatible with a wide range of power specifications and provides high immunity to noise
    * Compact models, non-contact types, and sanitary types are also available
  3. Guided radar level meter GRLM
    Without affected by changes such as temperatures, pressures, steam, gases
    Easy to initial adjustment
  4. Ultrasonic wave level meter YU-01A/05A/03A
    Built into a compact resin body
    Can be used for chemical agents, foods, and corrosive liquids
  5. Ultrasonic wave level meter YU-45
    A multiple amplifier is employed for 2-channel measurement
    Prevent interference from external noises and sound waves

Page Top
 

Corrosive liquids

We propose the optimal model for detecting and measuring corrosive liquids, to suit the liquid type and various other conditions.

Corrosive liquids Figure
  1. Capacitance type level switch YAL/YAE
    • High performance, compact, with the latest circuitry.
    • Compatible with a wide range of power specifications and provides high immunity to noise
  2. Capacitance type level switch LT/DS
    Easy to maintain amplifier unit
    A variety of electrodes are available
  3. Float type level switch YF-RP□S
    One unit can measure multiple points (a maximum of 7 points)
    PVC is used
  4. Capacitance type level meter MXL/MHL
    Capacitance type level meter MAE
    • Can measure a wide temperature range, from very low to very high
    • Compatible with a wide range of power specifications and provides high immunity to noise
    * Compact models, non-contact types, and sanitary types are also available
  5. Ultrasonic wave level meter YU-01A/05A/03A
    Built into a compact resin body
    Can be used for chemical agents, foods, and corrosive liquids
  6. Ultrasonic wave level meter YU-45
    A multiple amplifier is employed for 2-channel measurement
    Prevent interference from external noises and sound waves
  7. Guided radar level meter GRLM
    Without affected by changes such as temperatures, pressures, steam, gases
    Easy to initial adjustment

Page Top
 

Detect and measure interfaces

We suggest the best model, depending on liquid type, to configure interfaces and other conditions for detecting and measuring interfaces.

Detect and measure interfaces Figure

*This video introduces interface detection.
YAL

  1. Capacitance type level switch YAL/YAE
    • Compatible with a wide range of power specifications and provides high immunity to noise
    • Appropriately measures the interface at high resolution
  2. Capacitance type level switch LT/DS
    Easy to maintain amplifier unit
    A variety of electrodes are available
  3. Capacitance type level meter MXL/MHL
    Capacitance type level meter MAE
    Can measure a wide temperature range, from very low to very high
    Compatible with a wide range of power specifications and provides high immunity to noise

Page Top
 

Detect sediments

Detects sediment (or deposits) in liquid. Detects only sediment, ignoring the liquids.

Detect sediments Figure
  1. Sediment detection sensor CV-SED
    • Detects sediment (such as sludge) in a liquid.
    • Sensitivity can be adjusted to match the specific conditions
  2. Ultrasonic wave level meter YU-L20
    • Measure interfaces continuously without contact
    Detects sediment (such as sludge) in a liquid.

Page Top
 

Detect and measure bubbles

Detects and measures bubbles in the top layer of a liquid.

Detect and measure bubbles Figure

*This video introduces detects foam.
YAL

  1. Capacitance type level switch YAL/YAE
    • It can detect the presence of bubbles and also be set to a specific lower limen below which it will not register the presence of bubble
    • High performance, compact, with the latest circuitry
  2. Capacitance type level meter MXL/MHL
    Capacitance type level meter MAE
    Can measure a wide temperature range, from very low to very high
    Compatible with a wide range of power specifications and provides high immunity to noise

This product is good choice in the following conditions

Normal liquids, powder, grains, fine powder, lumps ? Standard applications
Small units, small tanks, small vessels, plumbings ? Applications for small tanks
High temperature, high pressure, vacuum, low temperature ? High temperature, high pressure applications
Sanitary, foods, phermaceuticals ? Sanitary, foods, pharmaceutical applications
Non contact measurement, analyze liquid ? Report the capacitance

  Please feel free to inquire us

  • Inquiries
Page Top