HOME > Select a model > Standard applications (liquids, powder, grains, lumps)

Standard applications (liquids, powder, grains, lumps)

This page introduces our level switches and continuous level meters to detect and measure liquids, powder, granules, or lumps in a normal environment.

 

Level switches for liquids

Various types of sensors can be used to detect points in normal liquids. We recommend the best matched model to your usage.

Level switches for liquids Figure

YAL-G1, YHP
are here to detect liquid levels in small tank. To detect the liquid level in a pipe, the
YAL-F1 is available.
The model recommended will depend on the installation space and conditions of the connection sections used.

  1. Capacitance type level switch YAL/YAE
    High performance, compact, with the latest circuitry
    Compatible with a wide range of power specifications and provides high immunity to noise
  2. Level switch exclusive for sanitary applications YAL-S2
    Can be used with SIP and CIP washing
    Very safe and sanitary performance
  3. Capacitance type level switch LT/DS
    Eliminates problems due to the adhesion of material
    Can measure anything from insulating to conductive substances
  4. Float type level switch YF/FL
    One unit can measure multiple points (a maximum of 7 points)
    Various models are available, such as the compact float type
  5. Float type liquid level switch YF-PP
    Can measure liquid levels at a maximum of 6 points
    The switch functions when the float moves up
  6. Electrode type water level sensor RE-G4
    Can measure water levels at a maximum of 4 points
    Detects the liquid level using a weak current between the electrodes
  7. Displacement type float switch FLD
    Float position can be set freely
    There is no need for a wooden crate

Page Top
 

Continuous level switches for liquids

We suggest the best model depending on the conditions, such as liquid type, temperature, and pressure, for the continuous measurement of normal liquid level.

Continuous level switches for liquids

Model GR-120 is also available, to measure the liquid level in a glass gauge on the side of a tank.

  1. Capacitance type level meter MXL/MHL
    Capacitance type level meter MAE
    • Can measure a wide temperature range, from very low to very high
    • Compatible with a wide range of power specifications and provides high immunity to noise
    * Compact models, non-contact types, and sanitary types are also available
  2. Float type level meter FXL/FXD
    Respond to changes in the electrical characteristic of the material to be measured
    Has simple, compact and multi-functional adjustment
  3. Ultrasonic wave level meter YU-01A/05A/03A
    Built into a compact resin body.
    Can be used for chemical agents, foods, and corrosive liquids
  4. Ultrasonic wave level meter YU-45
    A multiple amplifier is employed for 2-channel measurement
    Prevent interference from external noises and sound waves
  5. Guided radar level meter GRLM
    Without affected by changes such as temperatures, pressures, steam, gases
    Easy to initial adjustment
  6. Pressure type level meter MPL
    SUS316 is used for the parts contacting liquid, for excellent corrosion-proof endurance
    Can cope with lots of changes in liquid characteristics, except for change in the specific gravity of the liquid
  7. Rader type level meter MRG-10
    ??Measures levels in harsh environments such as in high temperatures, high pressures, vapor, gas, etc.
    ??The law restricting the use of radio transmissions does not apply, because weak radio signals are used

Page Top
 

Level switches for powders and grains

We can suggest the best model to suit your conditions, including the powder type (fine powder, powder, granules, lumps), tank temperature, and other factors.

Level switches for powders and grains Figure

For detecting powder level of high temperature and withstand load, model SHT (can endure 250 degrees with standard specification) and others are available.
*This video introduces powder and granules.
YAL

  1. Capacitance type level switch YAL/YAE
    • High performance, compact, with the latest circuitry
    • Compatible with a wide range of power specifications and provides high immunity to noise
  2. Capacitance type level switch LT/DS
    Easy to maintain amplifier unit
    A variety of electrodes are available
  3. Paddle type level switch ML/GL
    Reinforced seal prevents the entrance of powder and granulated materials inside the switch
    Long stable operation, because mum-type construction bearings are used
  4. Paddle type level switch ML-D1
    The unique design allows this device to handle high temperature detection
    We design the sensor part to match with each tank
  5. Compact vibration level switch CV600
    Employs free-range power supply system and has mounted fail-safe function
    No sensitivity adjustment needed
  6. Vibration type level switch CV
    Not affected by temperature, pressure, or dust
    No need sensitivity adjustment. Can measure fine powder

Page Top
 

Continuous level switch for powder and grains

We can suggest the best model to suit your conditions, including the powder type (fine powder, powder, granules, lumps ), tank temperature, and other factors.

Continuous level switch for powder and grains Figure
  1. Capacitance type level meter MHL
    Capacitance type level meter MAE
    • High performance, compact, with the latest circuitry
    • Compatible with a wide range of power specifications and provides high immunity to noise
  2. Guided radar level meter GRLM
    Without affected by changes such as temperatures, pressures, steam, gases
    Easy to initial adjustment
  3. Ultrasonic wave level meter YU-45
    A multiple amplifier is employed for 2-channel measurement
    Prevent interference from external noises and sound waves
  4. Sounding type level meter MDVC-2S
    Can measure from 2 to 20 m depths
    No adjustment needed because the meter adjusts automatically

Page Top
 

Detect and measure lumps

This sensor detects and measures lumps (gravel, stones, rocks). We recommend the best model to suit your use.

Detect and measure lumps Figure
  1. Rotating type level switch ML-5K
    • High durable mechanism to cope with lumps.
    • It detects lumps precisely.
  2. Vibration type level switch SHT
    Employs free-range power supply system and has mounted fail-safe function.
    No sensitivity adjustment needed.
  3. Ultrasonic wave level meter YU-45
    Measures lumps without contact.

This product is good choice in the following conditions

Slurry, corrosive liquids, interfaces, sediments, bubbles ? Special applications
Small units, small tanks, small vessels, plumbings ? Applications for small tanks
High temperature, high pressure, vacuum, low temperature ? High temperature, high pressure applications
Sanitary, foods, phermaceuticals ? Sanitary, foods, pharmaceutical applications
Non contact measurement, analyze liquid ? Sensing applying capacitance

  Please feel free to inquire us

  • Inquiries
Page Top